Publish Time: 2021-12-16 Origin: Site
The E27 Lamp holder plays a vital role in our production and life, so what are the special technical requirements and packaging of the E27 Lamp holder? Let's take a look together next.
Here is the content list:
Special technical requirements
Package
E27 Lamp holder electrical performance when the LED street lamp works under the nominal rated power supply voltage and rated frequency, the difference between the actual power consumption and the rated power should not be more than 10%, and the power factor should not be less than 0.92.
E27 Lamp holder protection grade the protection grade of LED street lamp A grade product should not be lower than IP67; B grade product should not be lower than IP66; C grade product should not be lower than IP65.
Average life the rated average life of the E27 Lamp holder should not be less than 30000h. Maximum temperature Led E27 Lamp holder rated maximum temperature Tc value should not be greater than 58 ℃. Maximum heat sink temperature the maximum heat sink temperature of each LED tube in the lamp should not be greater than 65°C. The voltage protection level of immunity surge suppression performance (anti-lightning strike) should not be lower than 2kV (line-line) and 4kV (line-ground). When some of the LED bulbs in the Led E27 Lamp holder are extinguished or the entire lamp is dimmed, the spot shape and road surface illumination uniformity should not change significantly.
In the E27 Lamp holder packaging box, there should be the following technical documents (packed in a waterproof bag): Packing list; Product qualification certificate; Product instruction manual; Accessories, and other related documents.
If the E27 Light Lamp holder package is opened and still needs to be stored, it should be repackaged. During transportation, the lamps should be protected from severe vibration and impact, and the packaging should be kept intact. There should be protective measures to prevent rain and snow during transportation. The storage and transportation pictorial signs should meet the requirements of GB/T191. After packaging, the lamps should be stored in a ventilated, dry, and non-corrosive warehouse. There should be no harmful gases, flammable and explosive materials, and corrosive chemicals in the Led E27 Lamp holder warehouse. The E27 Light Lamp holder should not be under heavy pressure, and there should be no strong mechanical vibration, shock, and magnetic field.
Shenzhen Bett Electronics Co., ltd was founded in 2008 years which is located in Guangdong province. With hi-tech manufacturing technology, specializing in the production of the waterproof connector, waterproof plug, air plug, LED connector, DC waterproof line, power line, terminal connector, AV cables, auto cables. It is widely used for cars, light, pleasure-boat, industrial equipment and so on. The above is about the special technical requirements and packaging-related content of the E27 Lamp holder. If you are interested in E27 Lamp holder, please contact us, our website is www.bett-connector.com. I look forward to your visit and hope to cooperate with you.